Other Functions; Auto Handdown; Dial Plan; Dial Peer - New Rock Technologies NRP1000 User Manual

NRP1000 Series IP Phone

3.3 Other Functions

3.3.1 Auto Handdown


Press Menu > Features > Enter > Auto Handdown > Enter.

Enable the auto handdown function using the navigation keys
the alert tone (in seconds) and press Save.

When the call ends, the phone will back to the standby interface after the hand down time expires.

3.3.2 Dial Plan


Press Menu > Features > Enter > Dial Plan > Enter.

Available plan include: Pressing # to send, Timeout to send, Timeout, Fixed Length Number,
Press # to Do BXFER, BXFER On Onhook, AXFER On Onhook. You can enable or disable each
dial plan using the navigation keys

3.3.3 Dial Peer


Press Menu > Features > Enter > Dial Peer > Enter.

Press Add and input the number and destination in the page displayed. For example: the number is
1 and the destination is 1234. Then, press Save.

Input 1# in the dial interface, you call the number 1234 in speed dial mode.

3.3.4 Auto Redial


Press Menu > Features > Enter > Auto Redial > Enter.

Enable the auto redial function using the navigation keys
set values for Interval and Times, and then press Save.

After auto redial is enabled, if the callee does not answer your call for the moment, you are
prompted whether use the auto redial function. If you press OK, the phone will call out the callee
according the Interval and Times you set.

3.3.5 Call Complete


Press Menu > Features > Enter > Call Complete > Enter.

Enable this function using the navigation keys

If the callee does not answer your call for the moment, the phone prompts you "Call Complete
Waiting number?" Press OK. When in the callee becomes idle, the phone prompts you "Call
Complete Waiting number?" (in 30s). If you press OK, the phone will call out the number
automatically.
New Rock Technologies, Inc.
and .
and .
and . Set the time to play
and . If you choose Enabled,
User Manual
3-5