BMW R 1100 S Repair Manual page 263

X
Tightening torques:
Engine to main frame
M10 screw, top right (1)
Initial tightening ............................................ 13 Nm
Final tightening ............................................. 42 Nm
M10 screw, top left (6).................................. 42 Nm
M10 bolts at top (struts to engine) (7) ........... 50 Nm
M10 screw, long, frame to gearbox (4) ......... 55 Nm
M12 screw, bottom (8) ................................. 80 Nm
M8 screw, long, bottom (2)........................... 24 Nm
Rear frame to main frame ............................. 31 Nm
Centre stand to main frame .......................... 42 Nm
Footrest assembly to main frame.................. 21 Nm
Strut to rear wheel drive/main frame
(load 85 kg/187 lbs onto motorcycle and
tighten loose reaction link)............................ 43 Nm
Suspension strut to main frame.................... 50 Nm
Swinging-arm fixed bearing stud bolt
to rear frame .................................................. 9 Nm
Swinging-arm floating-bearing stud bolt
to rear frame (clean thread + Loctite 2701)..... 7 Nm
Locknut of swinging-arm floating bearing
stud bolt to main frame .............................. 160 Nm
46.15