Checking valves for wear
•
Clean combustion residue from valves.
•
Check valve dimensions.
............................................see Technical Data
a
Remachining valve seat
D
e
Caution:
Width (B) and diameter (D) must always be main-
tained if valve seat is machined.
............................................see Technical Data
a
Checking and repairing cylinder head
•
Remove combustion residues from combustion
chamber.
•
Check sealing face for damage/distortion, and
skim flat if necessary.
Skimming sealing
face: ........... max. 0.2 mm (0.008 in) metal removal
Checking valve guide for wear
•
Check valve guide bore.
............................................see Technical Data
a
11.26
RS110890