Timing the ignition
00 2 650
•
Screw dial gauge holder, BMW No. 00 2 650,
and dial gauge, BMW No. 00 2 510, into right or
left spark plug bore.
•
Turn the engine over until the piston is at TDC.
•
Set the dial gauge needle to zero.
•
Check the dial gauge reading.
•
Turn the engine over until the piston is at TDC.
•
The dial gauge needle must be at zero.
•
Connect BMW MoDiTeC with adapter cable to
Hall-effect gate plate.
•
Set the timing, following the tester instructions.
12.12
00 2 510
S120050