Yamaha TDM850 1996 Service Manual page 261

HANDLEBAR
2. Install:
S Throttle grip 1
S Throttle cable housing 2
S Throttle cables 3
S Throttle cable housing cover
WARNING
Align the projection a on the throttle cable
housing with the hole b on the handlebar.
3. Install:
S Right handlebar switch 1
NOTE:
Align the projection a on the handlebar switch
with the hole b on the handlebar.
4. Install:
S Collar
S Master cylinder assembly 1
S Master cylinder bracket 2
CAUTION:
S Align the slit in the master cylinder bracket
with the punched mark a on the handlebar.
S Tighten first the upper bolt, then the lower
bolt.
5. Install:
S Clutch lever holder 1
NOTE:
Align the slit in clutch lever holder with the
punched mark a on the handlebar.
7-44
CHAS
9 Nm (0.9 mSkg)