Important Information - Yamaha TDM850 1996 Service Manual

IMPORTANT INFORMATION

IMPORTANT INFORMATION
PREPARATION FOR REMOVAL
1. Remove all dirt, mud dust, and foreign material
before removal and disassembly.
2. Use proper tools and cleaning equipment.
Refer to "SPECIAL TOOLS".
3. When disassembling the motorcycle keep
mated parts together. This includes gears, cyl-
inders, pistons, and other mated parts that
have been "mated" through normal wear.
Mated parts must be reused as an assembly or
replaced.
4. During the motorcycle disassembly, clean all
parts and place them in trays in the order of dis-
assembly. This will speed up assembly time
and help assure that all parts are correctly rein-
stalled.
5. Keep away from fire.
ALL REPLACEMENT PARTS
1. Use only genuine Yamaha parts for all replace-
ments. Use oil and/or grease recommended
by Yamaha for assembly and adjustment. Oth-
er brands may be similar in function and ap-
pearance, but inferior in quality.
GASKETS, OIL SEALS, AND O-RINGS
1. All gaskets, seals and O-rings should be re-
placed when an engine is overhauled.
All gaskets surfaces, oil seal lips and O-rings
must be cleaned.
2. Properly oil all mating parts and bearing during
reassembly. Apply grease to the oil seal lips.
1-2
GEN
INFO