Assembly; Installation - Yamaha TDM850 1996 Service Manual

FRONT WHEEL AND BRAKE DISCS

ASSEMBLY

Reverse the "DISASSEMBLY" procedure.
Note the following points.
1. Lubricate:
S Bearings
S Oil seals (lips)
Recommended lubricant:
Lithium soap base grease

INSTALLATION

Reverse the "REMOVAL" procedure.
Note the following points.
1. Lubricate:
S Front wheel axle
S Drive /Driven gear (speedometer)
Recommended lubricant:
Lithium soap base grease
2. Install:
S Speedometer gear unit 1
NOTE:
Be sure that two projections a inside the wheel
hub mesh with the two slots b in the gear unit as-
sembly.
3. Install:
S Front wheel
S Front wheel axle
NOTE:
Be sure that the projection (torque stopper) a of
the gear unit housing is positioned correctly.
4. Install:
S Pinch bolt
S Brake caliper (left/right) and cable guide
7-5
CHAS
58 Nm (5.8 mSkg)
19 Nm (1.9 mSkg)
40 Nm (4.0 mSkg)