VALVE CLEARANCE ADJUSTMENT
S Recheck the valve clearance.
S If the clearance is still incorrect, repeat all the
clearance adjustment steps until the specified
clearance is obtained.
10. Install:
S All removed parts
NOTE:
Install all removed parts in reversed order of their
removal. Note the following points.
11. Install:
S Chain guide (exhaust side)
S Chain guide (upper)
S Timing chain tensioner
Refer to "CAMSHAFT" in CHAPTER 4.
12. Install:
S Cylinder head cover
S Spark plugs
3-12
INSP
ADJ
10 Nm (1.0 mSkg)
18 Nm (1.8 mSkg)