Table of Contents
Advertisement
3
ADVANCED OPERATION
[VOL] function assignment
[VOL] can be used as a tuning control instead of [Y]
and [Z], to suit your preference. However, when [VOL]
functions as a tuning control, [Y] and [Z] function as
volume controls.
1. Hold down [ ] for 1 second to turn OFF the
power.
2. While holding down [Y] and [Z], turn ON the
power to enter the Initial Set mode.
3. Push [Y] or [Z] to select the dial assignment item
(tOP).
4. Rotate [VOL] to select an option.
5. Push [# ENT] to exit the Initial Set mode.
[VOL] and [Y]/[Z] function as described below,
depending on the option.
Option
[VOL]
tOP.VO
Volume control
tOP.di
Tuning control
The "Dial assignment" item in the Set mode
[VOL] functions as the volume control.
[VOL] functions as the tuning control.
[Y]/[Z]
Tuning controls
Volume controls
3-3
- Quick Links:
- Transmitting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-V86 and is the answer not in the manual?
Questions and answers
I bought this thinking it was a simple ship to shore to call bridges on the ICVW. How do I call on for example, Channel 9?
To call on Channel 9 using the Icom IC-V86, follow these steps:
1. Turn on the transceiver.
2. Push [VFO/MR/CALL] several times to select the memory mode.
3. Use [Y] or [Z] to navigate to Channel 9.
4. Press and hold the Push-To-Talk (PTT) button to transmit.
5. Release the PTT button to listen.
This will allow you to call on Channel 9.
This answer is automatically generated