Operating The Connected Devices By Remote Control Unit; Operating Av Devices - Denon AVR-1612 Manual

Operating the connected devices by remote control unit

Registering the supplied preset codes in the remote control unit
enables you to operate devices made by other manufacturers.

Operating AV devices

1
Press the input source select
button (vpage 18).
The operation mode of the remote
control unit is switched as shown in the
table.
Operation mode
Input
Input source
source of
Devices controllable with the
select button
this unit
remote control unit
– This unit (AMP-operation)
Device registered on the
z1
BD
button
Device registered on the
z1
SAT/CBL
button
Device registered on the
z1
TV
button
iPod connected to the USB port or
USB/iPod
control dock for iPod.
z1 Device registered on the
DVD
button
Device registered on the
z1
V.AUX
button
DOCK Control dock for iPod
TUNER Radio of this unit
Device registered on the
z1
GAME
button
z1 If a preset code is registered for this button, the remote control
unit of this unit can control another devices.
z2 This operation mode enables you to operate iPod, USB, Control
dock for iPod and TUNER.
SOURCE SELECT
When the is pressed, the AMP-operation mode
starts automatically.
NOTE
If the mode of the remote control unit is set to other than AMP-
AMP
operation mode, press to switch the remote control unit to the
AMP-operation mode to perform the following operations:
MENU
• For menu operation by pressing
• For setting the channel level of the unit by pressing
71
2
Operate this unit or the device whose input source is
switched.
• For details, refer to the operating instructions for each device.
z2 For operations of iPod, TUNER and USB memory device, see the
following pages.
BD
• iPod (vpage 23, 24)
• TUNER (vpage 26)
SAT/CBL
• USB memory device (vpage 28)
TV
DVD
V.AUX
GAME
CH LEVEL