Operating The Connected Devices By Remote Control Unit; Operating Av Equipment; Registering Preset Codes - Denon AVR-2311CI Owner's Manual

Operating the connected devices by remote control unit

Registering the supplied preset codes in the remote control unit
enables you to operate devices made by other manufacturers.

Operating AV equipment

1
Press ZONE SELECT to select a
zone for operation.
The zone mode indicator corresponding
to the operating zone lights.
ZONE
• The mode switches each time
SELECT
is pressed.
MAIN Select for the operations in
MAIN ZONE.
ZONE2 Select for the operations in
ZONE2.
ZONE3 Not used.
• If setting of "Specifying the zone used with
the remote control unit" (vpage 69) is "2",
operations in MAIN ZONE and ZONE2 are
enabled.
2
Press the input source select button (vpage 21).
• The input source for the zone selected in step 1 is switched.
• The operation mode of the remote control unit is switched as
shown in the table.
Input Devices controllable with the remote
Input source
source control unit
of this unit
button (Operation mode)
– This unit (amplifier operation)
z
BD Device registered on the
z DVD Device registered on the
z
TV
Device registered on the
z
SAT/CBL
Device registered on the
z
DVR Device registered on the
z
GAME Device registered on the
z
V.AUX Device registered on the
z
CD
Device registered on the
USB/iPod or iPod connected to the USB port or
DOCK control dock for iPod.
DOCK Control dock for iPod
iPod or USB memory device connected
USB/iPod
to the USB port
HD Radio HD Radio receiver
z If a preset code is registered for this button, the remote control
unit of this unit can control another devices.
NOTE
If the mode of the remote control unit is set to other than amp-
AMP
operation mode, press to switch the remote control unit to the
amp-operation mode to perform the following operations:
MENU
• For menu operation by pressing
• For setting the channel level of the unit by pressing
• For turning power in each zone on or off by pressing
ON ZONE/DEVICE OFF
or .
3
Operate this unit or the device whose input source is
switched.
• For details, refer to the operating instructions for each device.
For operations of iPod, HD Radio receiver, and USB, see the
following pages.
• iPod (vpage 23, 24)
• HD Radio receiver (vpage 26)
• USB memory device (vpage 27)

Registering preset codes

When preset codes are registered in the included remote control unit,
it can then be used to operate any devices you have, such as DVD
players or TVs made by different manufacturers.
In this menu, you can search and display the preset codes that can be
BD
button
preset in the included remote control unit.
DVD
button
n Buttons used for operating the devices
TV
button
ZONE/DEVICE ON ZONE/DEVICE OFF
,
q
For switching power of each device on or off.
SAT/CBL
button
ENTER RETURN
uio p , ,
w
DVR
button
For menu operation of each device.
MENU SETUP TOP MENU
GAME , ,
button e
For displaying the menu of each device.
V.AUX
button
1 2 3 6 7
r , , , , ,
0 9
t Number button ( –
CD
button
CH + CH –
,
y
TV POWER TV INPUT
,
u
For operating a TV
This button is enabled in any mode.
For details on operation with the remote control unit, see pages 23
to 27, 68.
CH LEVEL
ZONE/DEVICE
ENGLISH
8 9
,
+10
, )
65