Denon AVR-1612 Manual page 70

Setting items
Dynamic EQ ® ON : Use Dynamic EQ ® .
OFF : Do not use Dynamic EQ ® .
Solve the problem of
deteriorating sound quality
as volume is decreased
or
by taking into account
human perception and
room acoustics. Works with
MultEQ ® .
Reference Offset 0dB (Film Ref) : This is the default setting and should be used when
Audyssey Dynamic EQ ® is
listening to movies.
referenced to the standard 5dB : Select this setting for content that has a very wide dynamic range,
film mix level. It makes such as classical music.
adjustments to maintain 10dB : Select this setting for jazz or other music that has a wider dynamic
the reference response range. This setting should also be selected for TV content as that is usually
and surround envelopment mixed at 10 dB below film reference.
when the volume is turned 15dB : Select this setting for pop/rock music or other program material
down from 0 dB. However, that is mixed at very high listening levels and has a compressed dynamic
film reference level is not range.
always used in music or
Setting is enabled when "Dynamic EQ ® " is "ON" (vpage 55).
other non-film content.
Dynamic EQ ® Reference
Level Offset provides three
offsets from the film level
reference (5 dB, 10 dB, and
15 dB) that can be selected
when the mix level of the
content is not within the
standard.
Dynamic Volume ®
Midnight : Most adjustment to softest and loudest sounds.
Solve the problem of large Evening : Medium adjustment to loudest and softest sound.
variations in volume level Day : Least adjustment to loudest and softest sounds.
OFF : Do not use "Dynamic Volume ® ".
between TV, movies and
other content (between
quiet passages and
•
is displayed when set to "Midnight", "Evening" or "Day".
loud passages, etc.) by
• If "Dynamic Volume ® " is set to "Yes" in Auto Setup
automatically adjusting to
the setting is automatically changed to "Evening".
the user's preferred volume
setting.
BD
Setting details
is displayed when set to "ON".
(vpage
Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ ® " setting (vpage 54) is "Manual".
Setting items
Adjust Channel q Select the speaker tone adjustment method.
Correct the tone of each All : Adjust the tone of all speakers together.
speaker. L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Curve Copy Yes : Copy.
Copy "Audyssey Flat" curve No : Do not copy.
from MultEQ ® .
• "Curve Copy" is displayed after Audyssey ® Auto Setup has been
performed.
• When you select "Curve Copy" and press
Audyssey Flat?" prompt is displayed. Select either "Yes" or "No", and
press
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
When you select "Default" and press
settings.
the "Return settings to the default?" prompt
is displayed. Select either "Yes" or "No", and
press
15),
55
Default settings are underlined.
Setting details
ENTER
, the "Set EQ curve to
ENTER
.
ENTER
,
ENTER
.
Audio Adjust