Display - Denon AVR-1612 Manual

Display

q
Decoder indicators
These light when the respective decoders are operating.
w
Input signal indicators
e
Information display
The input source name, surround mode, setting values and other
information are displayed here.
r
Master volume indicator
t
Sleep timer indicator
This lights when the sleep mode is selected (vpage 43).
y
MUTE indicator
This lights when the mute mode is selected (vpage 19).
Q2 Q1
q w
Audyssey ® indicators
u
Light up as follows, depending on the setting of "MultEQ ® "
54), "Dynamic EQ ® "
(vpage
Volume ® " (vpage 55).
When "MultEQ ® ", "Dynamic EQ ® " and "Dynamic
Volume ® " are "ON".
When "MultEQ ® " and "Dynamic EQ ® " are "ON"
and "Dynamic Volume ® " is "OFF".
When "MultEQ ® " is "ON" and "Dynamic EQ ® " and
"Dynamic Volume ® " are "OFF".
i
Surround back indicator
This lights when audio signals are being output from the surround
back speakers (vpage 59).
o
Input mode indicators
Set the audio input modes for the different input sources
(vpage 69).
Q0 o i u y t
e
Q0
RESTORER indicator
This lights when the RESTORER mode is selected (vpage 56).
(vpage 55) and "Dynamic
Q1
HDMI indicator
This lights when playing using HDMI connections.
Q2
Tuner reception mode indicators
These light according to the reception conditions when the input
source is set to "TUNER".
STEREO : In the FM mode, this lights up when receiving stereo
broadcasts.
TUNED : Lights up when the broadcast is properly tuned in.
AUTO : Lights up when in the auto tuning mode.
79
r