Denon AVR-1612 Manual page 67

Surr.Parameter
Adjust surround sound parameters. It may not be possible to set this item depending on the input signal
(vpage 84 "Surround modes and surround parameters").
Setting items
Mode n In the PLgx or PLg mode
Set the play modes for the
Cinema : Surround sound mode optimized for movie sources.
different surround modes.
Music : Surround sound mode optimized for music sources.
Game : Surround sound mode optimized for games.
Pro Logic : Dolby Pro Logic playback mode (PLg mode only).
n In the PLgz mode
Height : Dolby PLgz Height playback mode.
n In the DTS NEO:6 mode
Cinema : Surround sound mode optimized for movie sources.
Music : Surround sound mode optimized for music sources.
• When "Surr.Parameter" – "PLgz Height"
"ON", the "Height" mode is set automatically.
• The "Music" mode is also effective for movie sources including a lot of
stereo music.
Cinema EQ ON : "Cinema EQ" is used.
Soften the treble range OFF : "Cinema EQ" is not used.
of movie soundtracks for
better understanding.
Auto : Automatic dynamic range compression on/off control according to
DRC
Compress dynamic range source. This can be set in the Dolby TrueHD mode.
(difference between loud Low / Middle / High : These set the compression level.
and soft sounds). OFF : Dynamic range compression always off.
D.Comp OFF : Turn dynamic range compression off.
Compress dynamic range Low / Middle / High : These set the compression level.
(difference between loud
and soft sounds).
BD
Default settings are underlined.
Setting details
(vpage 53) is set to
Setting items
LFE –10dB – 0dB
Adjust the low-frequency
For proper playback of the different sources, we recommend setting
effects level (LFE).
to the values below.
• Dolby Digital sources : "0dB"
• DTS movie sources : "0dB"
• DTS music sources : "–10dB"
C.Image 0.0 – 1.0 (0.3)
Assign center channel
signal to front left and right
channels for wider sound.
ON : Set.
Panorama
Assign front L/R signal also OFF : Do not set.
to surround channels for
wider sound.
Dimension 0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
C.Width 0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.
Delay Time 0ms – 300ms (30ms)
Adjust delay time to control
sound stage size.
Effect Level 1 – 15 (10)
Adjust effect signal level.
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
Room Size Small : Simulate acoustics of a small room.
Determine size of acoustic Medium-S : Simulate acoustics of a medium-small room.
environment. Medium : Simulate acoustics of a medium room.
Medium-L : Simulate acoustics of a medium-large room.
Large : Simulate acoustics of a large room.
NOTE
"Room Size" does not indicate the size of the room in which sources are
played.
52
Audio Adjust
Setting details
vSee overleaf