Denon AVR-1612 Manual page 36

• You can specify the duration of the on-screen
display to be displayed (default: 30 sec) at
uio
menu "iPod" (vpage 64). Press
p
to return to the original screen.
• To play back compressed audio with
extended bass or treble reproduction, we
recommend playback in RESTORER mode
(vpage 56). The default setting is
"Mode3".
STATUS
• In Browse mode, press on the
main unit during playback to check the title
name, artist name, and album name on the
display of this unit.
NOTE
STANDBY
• Press and set this unit's power to
the standby mode before disconnecting the
iPod. You can also switch the input source
to other than "DOCK" and then disconnect
the iPod.
• Depending on the type of iPod and the software version, some
functions may not operate.
• Note that DENON will accept no responsibility whatsoever for any
problems arising with the data on an iPod when using this unit in
conjunction with the iPod.
BD
n Viewing videos on an iPod in the Browse mode
When an iPod equipped with a video function is connected to a
DENON ASD-11R, ASD-3N, ASD-3W, ASD-51N and ASD-51W
control dock for iPod, image files can be played in the Browse
mode.
When using an ASD-11R
1
Prepare for playback.
q Connect the DENON control dock
for iPod to this unit (vpage 9
"Connecting a control dock for
iPod").
w Set the iPod in the DENON control
dock for iPod.
e Connect the TV to the VIDEO
MONITOR output connector of this
unit.
2
Press ON to turn on power to the
unit.
3
Press DOCK to switch the input
source to "DOCK".
21
4
Press SEARCH and hold it down for 2 seconds or
more to select the "Browse mode".
• There are two modes for displaying the contents recorded on the
iPod.
Browse mode
Display iPod information on the TV screen.
• English letters, numbers and certain symbols are displayed.
Incompatible characters are displayed as "." (period).
Remote mode
Display iPod information on the iPod screen.
• "Dock Remote" is displayed on the display of this unit.
iPod
Music
Videos
• In "Browse mode", the iPod display is as
shown at right.
NOTE
If the connections screen is not displayed,
the iPod may not be properly connected.
Reconnect it.
5
Use ui to select "Videos", then press
6
ui
Use to select the search item or folder, then
press ENTER or p .
7
Use ui to select the video file, then press
p 1
or .
Playback starts.
8
Switch the input setting of the TV to "Video".
The video file is displayed on the TV screen.
Playing an iPod
[1/2]
OK to disconnect.
ENTER or p .
ENTER ,