Quick Select Function - Denon AVR-1612 Manual

Quick select function

All of the settings in step 1 can be memorized together. By memorizing
frequently used settings, you can quickly access and enjoy a playback
environment that is consistently the same.
n Saving the settings
1
Set the items below to the settings you want to save.
q Input source (vpage 18)
w Volume (vpage 19)
e Surround mode (vpage 29)
r Video Select (vpage 69)
t Audyssey Setting
(Audyssey MultEQ ® , Audyssey
Dynamic EQ ® , Audyssey Dynamic
Volume ® ) (vpage 54)
2
QUICK SELECT
Press and hold the desired
"Memory" appears on the display.
The current settings will be memorized.
GQuick select defaultsH
Input source
BD
QUICK SELECT 1
QUICK SELECT 2 SAT/CBL
QUICK SELECT 3 GAME
QUICK SELECT 4 USB/iPod
BD
n Recalling the settings
QUICK SELECT
Press
settings you want to call out are saved.
Naming quick select settings
See "Quick Sel.Name" (vpage 64).
QUICK SELECT
If on the main unit is pressed, the same function as
with the remote control unit can be obtained.
NOTE
Input sources stored with the quick select function cannot be selected
until
if they have been deleted at "Source Delete"
case, store them again.
Volume
–40 dB
–40 dB
–40 dB
–40 dB
Various memory functions
at which the
n Personal memory plus function
n Last function memory
(vpage 63). In this
45
Convenient functions
This function sets the settings (input mode, surround mode, HDMI
output mode, MultEQ ® , Dynamic EQ ® , audio delay etc.) last
selected for the individual input sources.
The surround parameters, tone settings and the volumes of the
different speakers are stored for the individual surround modes.
This function stores the settings which were made before going
into the standby mode.
When the power is turned back on, the settings are restored.