Denon AVR-1612 Manual page 32

Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey ®
Auto Setup.
1
Use ui to select "Parameter Check" and then press
Auto Setup
Auto Setup
Parameter Check
2
ui
Use to select the item you want to check, then press
Measurement results for each speaker are displayed.
Sp. Config. Check Check the speaker configuration.
Distance Check
Check the distance.
Ch. Level Check Check the channel level.
Crossover Check Check the crossover frequency.
EQ Check Check the equalizer.
• If "EQ Check" is selected, press ui to select equalizing curve ("Audyssey" or "Audyssey Flat") to
be checked.
o p
Use to switch the display between the different speakers.
3
Press RETURN B .
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey ® Auto Setup settings
If you set "Restore" to "Yes", you can return to Audyssey ® Auto Setup measurement result (value
calculated at the start by MultEQ ® ) even when you have changed each setting manually.
Set up speakers (Audyssey ® Auto Setup)
ENTER .
Sp. Config. Check
Distance Check
Ch. Level Check
Crossover Check
EQ Check
ENTER p
or .
17