Connect
7.1-channel (Front height speaker) connection
The illustration on the right shows a connection example for performing
7.1-channel playback using the front height speakers.
To perform 7.1-channel playback using the front height speaker,
set "Pre Assign" to "F.HEIGHT" in steps 3 and 4 for "Set up "Pre
Assign"" (vpage 40).
NOTE
• A power amplifier (sold separately) is required for this connection.
Power amplifier
• For speaker cable connections, see
C page 6 "Connecting the
speakers".
L
• For speaker impedance, see page 36.
R
IN
R
L
FHR
FHL
FL
FR
SW
C
SL
SR
37