Operating The Connected Devices By Remote Control Unit; Operating The Main Remote Control Unit; Registering Preset Codes - Denon AVR-4311 Owner's Manual

ENGLISH

Operating the connected devices by remote control unit

Operating the main remote control unit

Registering the supplied preset codes in the remote control unit
enables you to operate devices made by other manufacturers.
Operating AV equipment
1
ZONE SELECT
Press to select a
zone for operation.
The zone mode indicator corresponding
to the operating zone lights.
ZONE
• The mode switches each time
SELECT
is pressed.
M Select for the operations in MAIN
ZONE.
Z2 Select for the operations in ZONE2.
Z3 Select for the operations in ZONE3.
Z4 Not used.
104
2
Press the input source select button (vpage 28).
• The input source for the zone selected in step 1 is switched.
• The operation mode of the remote control unit is switched as
shown in the table.
Input Operation mode
Input
source
source of
Devices controllable with the
select Display
this unit
remote control unit
button
– This unit (AMP-operation)
Device registered on the
z
1
BD
button
Device registered on the
z
1
DVD
button
Device registered on the
z
1
TV
button
Device registered on the
z
1
SAT/CBL
CBL
button
Device registered on the
z 1
DVR
button
Device registered on the
z
1
GAME
button
Device registered on the
z
1
V.AUX
button
Device registered on the
z 1
CD
button
NET/USB or iPod connected to the USB port
DOCK or control dock for iPod.
DOCK Control dock for iPod
• Network function
NET/USB • iPod or USB memory device
connected to the USB port
PHONO This unit (AMP-operation)
TUNER Radio of this unit
z1 If a preset code is registered for this button, the remote control
unit of this unit can control another devices.
z2 This operation mode enables you to operate iPod, USB, Control
dock for iPod, Network function and TUNER.
SOURCE SELECT
When is pressed, the AMP-operation mode starts
automatically.
NOTE
If the mode of the remote control unit is set to other than AMP-
AMP
operation mode, press to switch the remote control unit to the
AMP-operation mode to perform the following operations:
• For menu operation by pressing
• For setting the channel level of the unit by pressing
• For turning power in each zone on or off by pressing
ON ZONE/DEVICE OFF
or .
3
Operate this unit or the device whose input source is
z
2
switched.
BD
• For details, refer to the operating instructions for each device.
For operations of iPod, TUNER and USB memory device, see the
DVD
following pages.
• iPod (vpage 31, 32)
TV
• TUNER (vpage 35)
• Network function (vpage 38 – 43)
SAT/
• USB memory device (vpage 45)
DVR

Registering preset codes

GAME
When preset codes are registered in the included remote control unit,
it can then be used to operate any devices you have, such as DVD
V.AUX
players or TVs made by different manufacturers.
In this menu, you can search and display the preset codes that can be
preset in the included remote control unit.
CD
n Buttons used for operating the devices
ZONE/DEVICE ON ZONE/DEVICE OFF
,
q
For switching power of each device on or off.
ENTER RETURN
uio p , ,
w
For menu operation of each device.
MENU SETUP TOP MENU
, ,
e
For displaying the menu of each device.
1 , 2 , 3 , 6 , 7 , 8 , 9
r
z 2
0 9 +10
t Number button ( – , )
CH + CH –
,
y
TV POWER TV INPUT
,
u
For operating a TV
This button is enabled in any mode.
For details on operation with the remote control unit, see pages 31,
32, 35, 38, 39, 41 – 43, 45, 107.
MENU
CH LEVEL
ZONE/DEVICE