Denon AVR-1612 Manual page 74

Speaker Setup
Perform when setting the speakers manually or when changing settings made in Audyssey ® Auto Setup.
• If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to
select Audyssey MultEQ ® , Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ®
55).
• "System Setup" can be used without changing the settings. Please set if necessary.
Setting items
Pre Assign NORMAL : Set for connecting the surround back speakers to the SURR.
The signal output from BACK/FRONT HEIGHT connector in PRE OUT.
the SURR.BACK/FRONT F.HEIGHT : Set for connecting the front height speakers to the SURR.
HEIGHT terminals on PRE BACK/FRONT HEIGHT connector in PRE OUT.
OUT of the amplifier can be
A power amplifier (sold separately) is required for this connection.
switched in accordance with
the speaker environment.
Front : Set the front speaker size.
Speaker Config.
Select speaker configuration • Large : Use a large speaker that can adequately play back low
and size (bass reproduction frequencies.
capability). • Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
NOTE
Do not use the outward
• When "Subwoofer" is set to "No", "Front" is automatically set to
shape of the speaker to
"Large".
determine selection of a
• When "Front" is set to "Small", "Center", "Surround", "S.Back" and
"Large" or "Small" speaker.
"F.Height" can not be set to "Large".
Instead, use the frequencies
Center : Set the presence and size of the center speaker.
set in "Crossover Freq."
• Large : Use a large speaker that can adequately play back low
(vpage 61) as the
frequencies.
standard for determining
• Small : Use a small speaker that has inadequate playback capacity for
bass reproduction capability.
low frequencies.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
BD
Default settings are underlined.
(vpage 54,
Setting details
Setting items
Speaker Config. Subwoofer : Set the presence of a subwoofer.
(Continued) • Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to
"Yes".
Surround : Set the presence and size of the surround speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround speakers are not connected.
• When "Surround" is set to "Large", "S.Back" and "F.Height" can be
set to "Large".
• When "Surround" is set to "None", "S.Back" and "F.Height" are
automatically set to "None".
S.Back : Set the presence, size and number of surround back speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround back speakers are not connected.
• 2spkrs : Use two surround back speakers.
• 1spkr : Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L) channel.
Even when the "S.Back" setting is other than "None", sound may
not be emitted from the surround back speaker, depending on the
playback source. In this case, make "Surr.Parameter" – "S.Back"
setting other than "OFF" (vpage 53).
NOTE
When "Pre Assign" setting (vpage 59) is "NORMAL", you can make
the "S.Back" setting.
59
System Setup
Setting details
vSee overleaf