Connect - Denon AVR-1612 Manual

Connect

• For the method of connecting 5.1-channel speakers, see
6 "Connecting the speakers".
• For the method of connecting the TV, see C page 3 "Connect this
unit to the television using an HDMI cable (sold
7.1-channel (Surround back speaker) connection
The illustration on the right shows a connection example for performing
7.1-channel playback using the surround back speakers.
To perform 7.1-channel playback using the surround back speakers,
set "Pre Assign" to "NORMAL" in steps 3 and 4 for "Set up "Pre
Assign"" (vpage 40).
NOTE
• A power amplifier (sold separately) is required for this connection.
C page 6 "Connecting the
• For speaker cable connections, see
speakers".
• Connect so that the speaker cable core wires do not protrude
from the speaker terminal. The protection circuit may be
activated if the core wires touch the rear panel or if the + and
– sides touch each other (vpage 90 "Protection Circuit").
• Never touch the speaker terminals while the power supply is
connected. Doing so could result in electric shock (When the
Setup wizard is running, follow the instructions in the Setup
wizard screen for making connections.).
• Use speakers with the speaker impedances shown below.
Speaker terminals Speaker impedance
FRONT
CENTER
SURROUND
C page
separately)".
6 – 16 Ω
Power amplifier
L
R
IN
R L
FL
SW
C
SL
SBL
36
FR
SR
SBR