Operating The Connected Devices By Remote Control Unit; Operating Av Equipment; Registering Preset Codes - Denon AVR-791 Owner's Manual

ENGLISH

Operating the connected devices by remote control unit

Registering the supplied preset codes in the remote control unit
enables you to operate devices made by other manufacturers.

Operating AV equipment

1
Press ZONE SELECT to select a
zone for operation.
The zone mode indicator corresponding
to the operating zone lights.
• The mode switches each time
SELECT
is pressed.
MAIN Select for the operations in
MAIN ZONE.
ZONE2 Select for the operations in
ZONE2.
ZONE3 Not used.
• If setting of "Specifying the zone used with
the remote control unit" (vpage 63) is "2",
operations in MAIN ZONE and ZONE2 are
enabled.
2
Press the input source select button (vpage 20).
• The input source for the zone selected in step 1 is switched.
• The operation mode of the remote control unit is switched as
shown in the table.
60
Input
source
select
buttons
z
z
z
ZONE
z
z
z
z
z If a preset code is registered for this button, the remote control
unit of this unit can control another devices.
NOTE
If the mode of the remote control unit is set to other than amp-
operation mode, press
amp-operation mode to perform the following operations:
• For menu operation by pressing
• For setting the channel level of the unit by pressing
• For turning power in each zone on or off by pressing
ON ZONE/DEVICE OFF
or
3
Operate this unit or the device whose input source is
switched.
• For details, refer to the operating instructions for each device.
For operations of iPod, TUNER, and USB, see the following pages.
• iPod (vpage 22, 23)
• TUNER (vpage 24)
• USB memory device (vpage 25)
Devices controllable with the remote
Input source
control unit
of this unit
(Operation mode)
– This unit (amplifier operation)
BD
BD
Device registered on the button
DVD
DVD Device registered on the
TV
TV Device registered on the button
SAT/CBL
SAT/CBL Device registered on the
GAME
GAME
Device registered on the
V.AUX
V.AUX Device registered on the
CD CD
Device registered on the button
TUNER Radio of this unit
iPod or USB memory device connected
USB/iPod
to the USB port
USB/iPod or iPod connected to the USB port or
DOCK control dock for iPod.
DOCK Control dock for iPod
AMP
to switch the remote control unit to the
MENU
CH LEVEL
ZONE/DEVICE
.

Registering preset codes

When preset codes are registered in the included remote control unit,
it can then be used to operate any devices you have, such as DVD
players or TVs made by different manufacturers.
In this menu, you can search and display the preset codes that can be
preset in the included remote control unit.
n Buttons used for operating the devices
button
ZONE/DEVICE ON ZONE/DEVICE OFF
,
q
For switching power of each device on or off.
button
ENTER RETURN
uio p , ,
w
For menu operation of each device.
button
MENU SETUP TOP MENU
, ,
e
button
For displaying the menu of each device.
1 , 2 , 3 , 6 , 7 , 8
r
0 9 +10
t Number button ( – , )
CH + CH –
,
y
TV POWER TV INPUT
,
u
For operating a TV
This button is enabled in any mode.
For details on operation with the remote control unit, see pages 22
to 25, 62, and 63.
n Default settings for preset codes
The devices shown below are registered for each input source
button as default. Settings can be changed according to the
devices to be used.
Input source
select Category
buttons
Blu-ray Disc player
DVD player
Television
Satellite set top box
Cable set top box
DVD player
CD player
z
Control dock for iPod
zIf a control dock for iPod is not to be used, the preset code for
another device can be set to
NOTE
• The preset code cannot be registered to
• Do not register the preset code to
This button also functions as the Play button for an iPod.
, 9
Brand Preset code
DENON 32258
DENON 32134
SONY
10810
DirecTV 01377
Motorola 01376
DENON
32134
DENON 42867
DENON
42517
DOCK
.
TUNER NET/USB
or .
iPod
.