Operating The Connected Devices By Remote Control Unit; Operating Av Equipment; Registering Preset Codes - Denon AVR-591 Owner's Manual

ENGLISH

Operating the connected devices by remote control unit

Registering the supplied preset codes in the remote control unit
enables you to operate devices made by other manufacturers.

Operating AV equipment

1
Press the input source select
button (vpage 19).
The operation mode of the remote
control unit is switched as shown in the
table.
52
Input
Devices controllable with the remote
source Input source
control unit
select of this unit
(Operation mode)
buttons
– This unit (amplifier operation)
z
BD
Device registered on the
z DVD Device registered on the
z
TV Device registered on the
z
SAT/CBL Device registered on the
z
GAME
Device registered on the
z
V.AUX
Device registered on the
TUNER Radio of this unit
DOCK Control dock for iPod
DOCK Control dock for iPod
z If a preset code is registered for this button, the remote control
unit of this unit can control another devices.
NOTE
If the mode of the remote control unit is set to other than amp-
AMP
operation mode, press to switch the remote control unit to the
amp-operation mode to perform the following operations:
MENU
• For menu operation by pressing
• For setting the channel level of the unit by pressing
• For turning power in each device on or off by pressing
DEVICE OFF
or .
2
Operate this unit or the device whose input source is
switched.
• For details, refer to the operating instructions for each device.
For operations of iPod and TUNER, see the following pages.
• iPod (vpage 21)
• TUNER (vpage 22)

Registering preset codes

When preset codes are registered in the included remote control unit,
it can then be used to operate any devices you have, such as DVD
players or TVs made by different manufacturers.
In this menu, you can search and display the preset codes that can be
preset in the included remote control unit.
BD
button
n Buttons used for operating the devices
DVD
button
DEVICE ON DEVICE OFF
,
q
TV
button
For switching power of each device on or off.
SAT/CBL
button
ENTER RETURN
uio p , ,
w
For menu operation of each device.
GAME
button
MENU SETUP TOP MENU
, ,
e
V.AUX
button
For displaying the menu of each device.
1 , 2 , 3 , 6 , 7 ,
r
0 9
t Number button ( –
CH + CH –
,
y
TV POWER TV INPUT
,
u
For operating a TV
This button is enabled in any mode.
For details on operation with the remote control unit, see pages 21
to 22, 54, and 55.
n Default settings for preset codes
The devices shown below are registered for each input source
button as default. Settings can be changed according to the
CH LEVEL
devices to be used.
DEVICE ON
Input source
select Category
buttons
Blu-ray Disc player
DVD player
Television
Satellite set top box
Cable set top box
DVD player
z
Control dock for iPod
zIf a control dock for iPod is not to be used, the preset code for
another device can be set to
NOTE
• The preset code cannot be registered to
• Do not register the preset code to
This button also functions as the Play button for an iPod.
8 , 9
+10
, )
Brand Preset code
DENON 32258
DENON 32134
SONY
10810
DirecTV 01377
Motorola 01376
DENON 32134
DENON 42517
DOCK
.
TUNER
.
iPod
.