Intended Use; Applications; Tig Welding; Mma Welding - EWM Tetrix 180 Smart TGD Operating Instructions Manual

Intended use

Applications

3 Intended use
This machine has been manufactured according to the latest developments in technology and current
regulations and standards. It must only be operated in line with the instructions on correct usage.
Hazards due to improper usage!
Hazards may arise for persons, animals and material objects if the equipment is not
used correctly. No liability is accepted for any damages arising from improper usage!
• The equipment must only be used in line with proper usage and by trained or expert staff!
• Do not modify or convert the equipment improperly!
3.1 Applications
3.1.1

TIG welding

TIG welding with direct current.
Non-contact HF ignition or contact ignition with Liftarc.
3.1.2

MMA welding

Manual arc welding or, for short, MMA welding. It is characterised by the fact that the arc burns between
a melting electrode and the molten pool. There is no external protection; any protection against the
atmosphere comes from the electrode.
14
WARNING
099-000124-EW501
29.07.2011