EWM Tetrix 180 Smart TGD Operating Instructions Manual page 19

Item Symbol Description
9 sec
10 sec
11
12
099-000124-EW501
29.07.2011
0
Down-slope time (TIG)
0.00 s to 20.0 s (0.1 s increments).
The down-slope time can be set separately for non-latched and latched.
Gas post-flow time (TIG)
Setting ranges: 0.00 sec to 40.0 sec (0.1 sec increments).
Select welding parameters button
This button is used to select the welding parameters depending on the welding process
and operating mode used.
Welding parameter setting rotary transducer
Setting flows, times and parameters.
Machine description
Machine control – Operating elements
19