To Set Up Bridge Mode - NETGEAR AirCard Smart Cradle DC112A User Manual



To set up bridge mode:

1. Make a note of the WiFi settings of the router to which the cradle will connect.
You need to know the SSID, WiFi security mode, WiFi password, and operating
frequency (either 2.4 GHz or 5 GHz).
2. Launch a web browser from a computer or WiFi device that is connected to the Smart
Cradle.
3. In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
4. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > Wireless Settings.
6. Scroll down and select the Use other operation mode check box and the Enable Bridge
mode radio button.
The screen adjusts.
AirCard Smart Cradle
Network Settings
92