Remote Management - NETGEAR AirCard Smart Cradle DC112A User Manual

The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select Attached Devices.
The Wired Devices section lists devices that are connected to the cradle with Ethernet
cables. The other sections list devices that are connected to each WiFi band in the WiFi
network. The following information is displayed for wireless devices:
• SSID. The wireless network name (SSID).
• IP Address. The IP address that the cradle assigned to this device when it joined the
network. This number can change if a device is disconnected and rejoins the network.
• MAC Address. The unique MAC address for each device does not change. The MAC
address is typically shown on the product label.
• Device Name. If the device name is known, it is shown here.
To update this screen, click the Refresh button.

Remote Management

You can access your cradle over the Internet to view or change its settings. You must know
the cradle's WAN IP address to use this feature. For information about remote access using
Dynamic DNS, see
Be sure to change the password for the user name admin to a secure password. The ideal
password contains no dictionary words from any language and contains uppercase and
lowercase letters, numbers, and symbols. It can be up to 30 characters. See
admin Password on page 98.

To set up remote management:
1. Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
AirCard Smart Cradle
Chapter 9, Access USB Devices Through the
Manage the AirCard Smart Cradle
109
Internet.
Change the