NETGEAR AirCard Smart Cradle DC112A User Manual page 12

Hide thumbs Also See for AirCard Smart Cradle DC112A:
Table of Contents

Advertisement

4.
Slide the plastic holder forward to secure the mobile hotspot.
Note:
A gap of up to 1.5 mm between the plastic holder and the mobile
hotspot is normal. Do not try to push the holder forward to fill the gap.
When the Smart Cradle detects your mobile hotspot's Internet connection, the Internet
LED lights green and the Smart Cradle uses the mobile hotspot's Internet connection.
The mobile hotspot must have an active Internet service account.
When your mobile hotspot detects that it is docked, the mobile hotspot LCD and home
page indicate that it is docked in the Smart Cradle. The mobile hotspot uses the Smart
Cradle's more powerful internal 3G/4G antennas for better network coverage and
charges itself through the Smart Cradle.
The mobile hotspot disables its WiFi signal so that you can connect to the Smart Cradle's
stronger WiFi signal.
Note:
Some hotspots require a firmware update before they automatically
disable WiFi when docked. If your mobile hotspot broadcasts its WiFi
signal when docked, manually set up your mobile hotspot to disable
WiFi.
See the mobile hotspot user guide for more information.
AirCard Smart Cradle
Hardware Setup
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents