Table of Contents
Advertisement
10.
In the Triggering Port field, enter the number of the outbound traffic port that will open the
inbound ports.
11.
Complete the Connection Type, Starting Port, and Ending Port fields.
12.
Click the Apply button.
The service is now in the Portmap table. You must enable port triggering before the
cradle uses port triggering. See
Enable Port Triggering
To enable port triggering:
1.
Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
2.
In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
3.
Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering screen displays.
5.
Select the Port Triggering radio button.
6.
Clear the Disable Port Triggering check box.
If this check box is selected, the cradle does not use port triggering even if you use
specified port triggering settings.
7.
In the Port Triggering Timeout field, enter a value up to 9999 minutes.
This value controls how long the inbound ports stay open when the cradle detects no
activity. This value is required because the cradle cannot detect when the application
terminates.
AirCard Smart Cradle
Enable Port Triggering
Control Internet Access
59
on page 59.
Hide quick links:
Advertisement
Table of Contents
