Table of Contents
Advertisement
Note:
To use a docked mobile hotspot with IPv6 data connection, the IPv6
Internet connection type should be set as pass through. Before you
set up this connection, see
Connections
is implemented.
To set up a pass-through IPv6 Internet connection:
1.
Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
2.
In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
3.
Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
5.
In the Internet Connection Type list, select Pass Through.
The screen adjusts, but no additional fields display.
6.
Click the Apply button.
Your settings are saved.
Set Up an IPv6 Fixed Internet Connection
To set up a fixed IPv6 Internet connection:
1.
Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
2.
In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
3.
Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
AirCard Smart Cradle
Specify WAN Ethernet IPv6 Internet
on page 27 so that you understand how the connection
Internet Setup
34
Hide quick links:
Advertisement
Table of Contents
