Reserve Lan Ip Addresses; Reserve An Ip Address - NETGEAR AirCard Smart Cradle DC112A User Manual

Reserve LAN IP Addresses

When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the cradle's DHCP server. Assign
reserved IP addresses to computers or servers that require permanent IP settings.

Reserve an IP Address


To reserve an IP address:
1. Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
2. In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
3. Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup screen displays.
5. In the Address Reservation section, click the Add button.
The Address Reservation screen displays.
6. In the IP Address field, type the IP address to assign to the computer or server.
Choose an IP address from the cradle's LAN subnet, such as 192.168.100.x.
7. Type the MAC address of the computer or server.
Tip: If the computer is already on your network, you can copy its MAC
address from the Attached Devices screen and paste it here.
8. Click the Apply button.
The reserved address is entered into the table.
The reserved address is not assigned until the next time the computer contacts the cradle's
DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release
and renew.
AirCard Smart Cradle
Network Settings
78