Table of Contents
Advertisement
Use the WPS Wizard for WiFi Connections
The WPS Wizard helps you add a wireless computer or device to your WiFi network without
typing the WiFi password.
To use the WPS Wizard:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
Smart Cradle.
2.
In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1
A login screen displays.
3.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > WPS Wizard.
A note explaining WPS displays.
5.
Click the Next button.
6.
Select a setup method:
•
Push button. Click the WPS button on this screen.
•
PIN Number. The screen adjusts. Enter the client security PIN and click the Next
button.
7.
Within two minutes, go to the client device and use its WPS software to connect to the WiFi
network.
The WPS process automatically sets up your wireless computer with the network
password when it connects. The cradle WPS screen displays a confirmation message.
Specify Basic WiFi Settings
The cradle WiFi network name (SSID), network key (password), and security option
(encryption protocol) are preset in the factory. You can find the preset SSID and password on
the cradle label. The preset SSID and password are uniquely generated for every device to
protect and maximize your wireless security.
You don't need to change your preset security
settings, make a note of the new settings and store it in a safe place where you can easily
find it.
If you use a WiFi connection when you change the SSID or other wireless security settings,
you are disconnected when you click the Apply button. To avoid this problem, use a computer
with a wired connection to access the cradle.
AirCard Smart Cradle
settings.
If you change your preset security
Network Settings
80
Hide quick links:
Advertisement
Table of Contents
