Table of Contents
Advertisement
3.
Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Setup > LAN Setup.
5.
In the IP Address field, type the IP address.
6.
In the IP Subnet Mask, type the subnet mask of the cradle.
The IP address and subnet mask identify which addresses are local to a specific device
and which must be reached through a gateway or cradle.
7.
Change the RIP settings.
Router Information Protocol (RIP) allows the cradle to exchange routing information with
other routers.
a. In the RIP Direction list, select one of the following:
•
Both. The cradle broadcasts its routing table periodically and incorporates
information that it receives.
•
Out Only. The cradle broadcasts its routing table periodically.
•
In Only. The cradle incorporates the RIP information that it receives.
b. In the RIP Version list, select one of the following:
•
Disabled. This is the default setting.
•
RIP-1. This format is universally supported. It is adequate for most networks,
unless your network setup is unusual.
•
RIP-2. This format carries more information. Both RIP-2B and RIP-2M send the
routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses
multicasting.
8.
Click the Apply button.
AirCard Smart Cradle
Network Settings
75
Hide quick links:
Advertisement
Table of Contents
