Rear Panel; Attach The External Wifi Antennas - NETGEAR AirCard Smart Cradle DC112A User Manual

Rear Panel

The rear panel connections and buttons are shown in the following figure.
WPS TS-9
button antenna
connector
Figure 4. Cradle rear panel
Pressing the WPS button lets you add a computer or WiFi device to the WiFi network without
typing the WiFi network password (security key). For more information about WPS, see
Connect to the AirCard Smart Cradle
Pressing the Reset button restores the factory settings. For more information about the
factory settings, see

Attach the External WiFi Antennas

For the best WiFi performance, attach both antennas.

To attach the external WiFi antennas:
1. Align the antennas with the
antenna posts on the Smart
Cradle.
2. Attach the antennas on the
threaded antenna posts, ensuring
that the connection is secure.
3. Adjust the antenna positions so
that they point straight up.
AirCard Smart Cradle
Ethernet Internet
port
LAN ports 1–4
on page 17.
Factory Settings on page 154.
Hardware Setup
Reset Power
button On/Off
button
10
TS-9 Power
antenna input
connector