Table of Contents
Advertisement
5.
Click the Add button.
The screen adjusts.
6.
In the Route Name field, type a name for this static route (for identification purposes only).
7.
To limit access to the LAN only, select the Private check box.
If the Private check box is selected, the static route is not reported in RIP.
8.
To make this route effective, select the Active check box.
9.
Type the IP address of the final destination.
10.
Type the IP subnet mask for this destination.
If the destination is a single host, type 255.255.255.255.
11.
Type the gateway IP address, which must be on the same LAN segment as the cradle.
12.
Type a number from 1 through 15 as the metric value.
This value represents the number of cradles between your network and the destination.
Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
13.
Click the Apply button.
The static route is added.
Edit a Static Route
To edit a static route:
1.
Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
2.
In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
3.
Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > Static Routes.
The Custom Static Routes screen displays.
AirCard Smart Cradle
Manage the AirCard Smart Cradle
107
Hide quick links:
Advertisement
Table of Contents
