NETGEAR AirCard Smart Cradle DC112A User Manual page 9

Table 1. LED descriptions
LED Description
Power • Solid amber. The cradle is booting.
• Blinking amber. The firmware is upgrading, or someone pressed the Reset button.
• Solid green. The cradle powered on and ready.
• Blinking green. The firmware is corrupted. Contact your Internet service provider for
technical support
• Off. Power is not supplied to the cradle.
USB port • Solid green. A USB device is connected and is ready.
• Solid red. A USB device is connected but unrecognized.
• Off. No USB device is connected or someone clicked the Safely Remove Hardware
button, and it is now safe to remove the attached USB device.
Internet
• Solid green. The Internet connection is ready.
• Solid amber. The cradle is not connected to the Internet.
• Off. The Smart Cradle does not detect a docked mobile hotspot.
Ethernet ports
1–4
• Solid green. A powered-on device is connected to this Ethernet port.
• Off. No device is connected to this Ethernet port.
2.4 GHz
• Solid green. The 2.4 GHz WiFi radio is operating.
Wireless
• Blinking. The cradle is in WPS mode.
• Off. The WiFi radio is off.
5 GHz WiFi
• Solid green. The 5 GHz WiFi radio is operating.
• Blinking. The cradle is in WPS mode.
• Off. The WiFi radio is off.
AirCard Smart Cradle
Hardware Setup
9