NETGEAR AirCard Smart Cradle DC112A User Manual page 90

3. In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
4. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > Wireless AP.
6. Select the Enable AP Mode check box.
7. Scroll down and select the radio button for the IP address setting that you want to use:
• Get dynamically from existing router. The other router on the network assigns an
IP address to this router while this router is in AP mode.
• Enable fixed IP settings on this device (not recommended). Use this setting if you
want to manually assign a specific IP address to this router while it is in AP mode.
Using this option effectively requires advanced network experience.
Note: To avoid interference with other routers or gateways in your network,
NETGEAR recommends that you use different wireless settings on
each router. You can also turn off the wireless radio on the other router
or gateway and use the DC112A only for wireless client access.
8. Click the Apply button.
The IP address of the router changes, and you are disconnected.
9. In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
AirCard Smart Cradle
Network Settings
90