Table of Contents
Advertisement
5.
In the Internet Connection Type list, select Fixed.
The screen adjusts:
6.
Configure the fixed IPv6 addresses for the WAN connection:
•
IPv6 Address/Prefix Length. The IPv6 address and prefix length of the cradle WAN
interface.
•
Default IPv6 Gateway. The IPv6 address of the default IPv6 gateway for the cradle's
WAN interface.
•
Primary DNS Server. The primary DNS server that resolves IPv6 domain name
records for the cradle.
•
Secondary DNS Server. The secondary DNS server that resolves IPv6 domain
name records for the cradle.
Note:
If you do not specify the DNS servers, the cradle uses the DNS servers
that are configured for the IPv4 Internet connection on the Internet
Setup screen. (See
page 24.)
7.
Select an IP Address Assignment radio button:
•
Use DHCP Server. This method passes more information to LAN devices but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config. This is the default setting.
This setting specifies how the cradle assigns IPv6 addresses to the devices on your
home network (the LAN).
8.
In the IPv6 Address/Prefix Length fields, specify the static IPv6 address and prefix length
of the cradle's LAN interface.
If you do not specify an ID here, the cradle generates one automatically from its MAC
address.
9.
Click the Apply button.
AirCard Smart Cradle
Manually Set Up the Internet Connection
Internet Setup
35
on
Hide quick links:
Advertisement
Table of Contents
