Factory Settings - NETGEAR AirCard Smart Cradle DC112A User Manual

Factory Settings

You can return the AirCard Smart Cradle its factory settings. Use the end of a paper clip or a
similar object to press and hold the Reset button on the back of the AirCard Smart Cradle for
at least seven seconds. The AirCard Smart Cradle resets and cradle returns to the factory
configuration settings shown in the following table. When the AirCard Smart Cradle restarts,
all LEDs on the front panel light.
Table 3. Factory default settings
Feature
Smart Cradle User login URL
login
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP range
Time zone
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight
saving time
SNMP
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
AirCard Smart Cradle
Default behavior
netgear.cradle or http://192.168.100.1
admin
password
Use default hardware address
1500
AutoSensing
http://192.168.100.1
255.255.255.0
Enabled
192.168.100.2 to 192.168.100.254
Pacific time
192.168.100.2
192.168.100.254
Disabled
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA, GMT+10 for AU
Disabled
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Supplemental Information
154