Table of Contents
Advertisement
Your changes are saved.
13.
To verify that your Dynamic DNS service is enabled in the cradle, click the Show Status
button.
A message displays the Dynamic DNS status.
Change the Dynamic DNS Settings
To change your settings:
1.
Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
2.
In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
3.
Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Settings > Dynamic DNS.
The Dynamic DNS screen displays.
5.
Change your DDNS account settings as necessary.
6.
Click the Apply button.
Your changes are saved.
Set Up Your Personal FTP Server
To set up your personal account and use FTP:
1.
Get your free NETGEAR Dynamic DNS domain name.
See
Your Personal FTP Server
2.
Make sure that your Internet connection is working.
Your cradle must use a direct Internet connection. It cannot connect to a different router to
access the Internet.
3.
Connect a USB hard disk drive to the USB port on the cradle.
4.
Set up FTP access in the cradle.
See
Set Up FTP Access Through the Internet
5.
On a remote computer with Internet access, you can use FTP to access your cradle using
ftp://yourname.mynetgear.com.
AirCard Smart Cradle
on page 130.
Access USB Devices Through the Internet
134
on page 128.
Hide quick links:
Advertisement
Table of Contents
