Control The Wireless Radios - NETGEAR AirCard Smart Cradle DC112A User Manual

computers and wireless devices can connect to the WiFi network by using either WPA2 or
WPA security.
9. Click the Apply button.
Your Smart Cradle settings are saved.

Control the Wireless Radios

The cradle's internal wireless radios broadcast signals in the 2.4 GHz and 5 GHz range. By
default, the radios are on so that you can connect wirelessly to the cradle. When the wireless
radios are off, you can still use an Ethernet cable for a LAN connection to the cradle.
You can log in to the cradle and enable or disable the wireless radios. You can also turn the
WiFi radios off and on based on a schedule. (See

To enable or disable the wireless radios:
1. Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
2. In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
3. Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
AirCard Smart Cradle
Set Up a Wireless Schedule
Network Settings
86
on page 87).