Table of Contents
Advertisement
Euro Simon Security System
Non-alarms include: Latchkey, No Activity, Openings, Closings, Fail to Open, Fail to Close,
Force Armed, AC Power Failure, CPU Low Battery, and Trouble Restorals.
¾
To set Phone Mod 1, press:
Add—Option #—12—0, 1, 2, or 3—DONE.
¾
To reset Phone Mod 1 (return to default), press:
Delete—Option #—12—DONE.
Option 13: Phone Mod 2 (Default = 00)
Determines the secondary phone number (Option 5) report content and reporting format. The fol-
lowing table describes the choices. All entries must be 2 digits.
Setting #
00
01
02
03
04
05
06
07
08
09
10
Alarms only (See Options 43 and 44 for more
¾
To set Phone Mod 2, press:
Add—Option #—13—0, 1, 2, or 3—DONE.
¾
To reset Phone Mod 2 (return to default), press:
Delete—Option #—13—DONE.
Option 14: DTMF Dialing (Default = on)
Determines whether the panel uses DTMF (on) or pulse (off) for dialing programmed phone
numbers.
¾
To turn on DTMF Dialing, press:
Add—Option #—14—DONE.
¾
To turn off DTMF Dialing, press:
Delete—Option #—14—DONE.
¾
Option 15: No Activity Time-out (Default = off)
Determines whether the panel sends a No Activity report to a central station when the pro-
grammed time period elapses (on), or if the feature is disabled (off).
No activity means control panel, remote handheld, and keychain touchpad buttons have not be
pressed and sensors have not been tripped within a specified period of time (except sensors in
group 25).
The time-out can be set from 02 - 24 hours. All entries must be 2 digits.
¾
To set No Activity Time-out, press:
Add—Option #—15—02 - 24—DONE.
¾
To turn off No Activity Time-out, press:
Delete—Option #—15—DONE.
Phone Mod 2
Content
All
All
Alarms only
Alarms only
Non-Alarms only
Non-Alarms only
Phone 1 failure
Phone 1 failure
Reserved
Reserved
details.)
Format
SIA
Contact ID
SIA
Contact ID
SIA
Contact ID
SIA
Contact ID
Voice Event Notifica-
tion
20
Advertisement
Table of Contents
