Wiring A Phone Line To The Panel - GE Simon XT Installation Manual

Figure 6: Normally closed hardwired reed switches
Note: Do not install the resistor at the panel terminals. This does not provide
supervision of the wire.

Wiring a phone line to the panel

You can connect a phone line to the panel for systems monitored by a central
monitoring station or systems that notify users by a voice event notification.
DSL (digital subscriber line) allows the use of multiple devices on a single phone line
simultaneously. For DSL environments, connect the panel line-in jack to an available
phone jack on the premises. You may also need an inline filter to ensure panel
reporting is successful.
Note: Avoid connecting the panel to a standard phone (voice) line in this manner.
Other devices in use at the same time the panel is using the line can prevent reports
from going through.
Figure 7: Phone connectors
Simon XT Installation Manual
47 kohm resistors
5
1 2 3 4
1 HW1 I/O
2 HW1&2 DC Out
3 HW2 In
RJ45 connector (LINE)
RJ11 connector (PHONE)
17