Table of Contents
Advertisement
Note
Swinger Shutdown does not
affect smoke and fire sen-
sors.
Euro Simon Security System
Delete—Option #—63—DONE.
Option 64: No Arm on Panel Low Battery (Default = off)
Determines whether the system prevents users from arming if a low CPU battery condition exists
(on) or not (off).
¾
To turn on No Arm on Panel Low Battery, press:
Add—Option #—64—DONE.
¾
To turn off No Arm on Panel Low Battery, press:
Delete—Option #—64—DONE.
Option 65: No Usage Report (Default = off)
Determines whether the panel sends a No Usage report to the central station if the user has not
operated the system before the programmed time expires (on) or not (off). The timer starts each
time the system is disarmed.
This is a customer service feature that alerts the central station if a customer is not using their
security system. The service provider can then contact the customer to find out why the system is
not being used, and help correct any problems for the customer.
The time can be set from 001 to 254 days. Entries must be 3 digits.
¾
To turn on No Usage Report, press:
Add—Option #—65—001 - 254—DONE.
¾
To turn off No Usage Report, press:
Delete—Option #—65—DONE.
Option 66: External Siren Delay (Default = off)
Determines whether external siren activation is delayed 30 seconds after an alarm caused by a
delayed sensor (on), or if external siren activation is immediate upon alarm activation (off).
¾
To turn on External Siren Delay, press:
Add—Option #—66—DONE.
¾
To turn off External Siren Delay, press:
Delete—Option #—66—DONE.
Option 67: Quick Exit (Default = off)
Determines whether pressing the Disarm button when the system is armed activates the exit
delay time to allow exit and re-entry without disarming the system (on) or not (off).
This feature is useful if the user wants to step outside briefly and return, such as to get the paper.
If the system is armed and the user presses the Disarm button, the panel announces "Exit time
on" and sounds exit delay beeps. This allows a designated entry/exit door to be open for up to 2
minutes without causing an alarm. When the door is closed, the beeps stop and the door is armed
again.
¾
To turn on Quick Exit, press:
Add—Option #—67—DONE.
¾
To turn off Quick Exit, press:
Delete—Option #—67—DONE.
Option 68: Swinger Shutdown (Default = on)
Determines whether the panel prevents the same sensor from activating an alarm more than once
in a single arming period (on) or not (off).
¾
To turn on Swinger Shutdown, press:
Add—Option #—68—DONE.
¾
To turn off Swinger Shutdown, press:
32
Advertisement
Table of Contents
