CanyCom CM 230 Operator's Manual page 83

Ride-on
Table of Contents

Advertisement

Area
Abnormal noises or vibrations
from in or around the engine
Excessive engine oil
Engine overheating
Excessive fuel consumption
Excessive black smoke
Engine
(Abnormal exhaust)
White smoke or blue smoke
comes out. (Abnormal
exhaust)
Unit does not move with HST
Power
lever in forward or reverse.
transmission
system
Unit moves even when HST
lever is in neutral position.
Not effective
Brake system
Excessive play of brake pedal. * Incorrect adjustment
Heavy steering
Steering
system
Cannot drive straight
Abnorma
chassis
Chassis
Troubleshooting
Malfunction
* Looseness of engine mounting
* Others
* Engine oil leak
* Insufficient engine oil
* Blower housing and cooling fin
* Fuel leak from fuel system
* Clogged air cleaner
* Choke not opened completely
* Poor compression
* Clogged air cleaner
* Excessive oil intake
* Poor fuel
* An excessive amount of engine
* Improper fuel
* Worn cylinder or piston ring
* Insufficient HST oil
* Parking brake is applied.
* HST speed shift neutral position
* Worn out brake lining
* Oil penetrates within brake
* Water penetrates inside of
* Worn out tire
* Incorrect tire air pressure
* Malfunction inside of steering
* Incorrect tie-rod adjustment
* Incorrect tire air pressure
l vibration of the
* Loose tire fixing bolt
* Breakage of wheel bearing
* Crack of tire
Possible cause
bolts
clogging
oil added.
adjustment not correct.
drum.
drum.
gear
adjustment
-77-
Corrective action
→ Check and carry out additional
tightening.
→ Consult dealer
→ Check and repair.
→ Add. (See page 49)
→ Clean. (See page 53)
→ Check and repair.
(Consult dealer.)
→ Clean or replace.
(See pages 52)
→ Put choke to FULL position.
→ Check and repair.
(Consult dealer.)
→ Clean or replace.
(See pages 52)
→ After checking adjust oil
volume. (See page 49)
→ Replace fuel.
→ After checking adjust oil
volume. (See page 49)
→ Replace fuel.
→ Check and repair.
(Consult dealer.)
→ Add. (See page 57)
→ Release parking brake lock
lever.
→ Adjust. (Consult dealer.)
→ Replace lining.
(Consult dealer.)
→ Replace oil seal.
(Consult dealer.)
→ Engine brake to dry water
inside of drum.
→ Replace tire.
→ Adjust. (See page 62)
→ Adjust. (See page 63)
→ Repair.
(Consult dealer.)
→ Adjust.
Adjust tir
e air pressure.
(See page 63)
→ Retighten.
→ Replace.
(Consult dealer.)
→ Replace.
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CM 230 and is the answer not in the manual?

Questions and answers

Table of Contents