Table of Contents
Advertisement
7
Running System
* Always stop the engine before performing maintenance.
Inspecting, Adding, and Replacing Transmission Oil
* Allow oil and parts to cool before performing maintenance to reduce risk of
burns.
` Properly dispose of waste oil after removing from machine.
5314M-0704-020E
5314M-0704-030E
Maintenance
Oil level check bolt
Lubricating plug
Inspecting Oil
1. Park the machine on level ground.
2. Remove the oil level check bolt from the
oil-checking port. Oil level is sufficient if drains
from the port.
Adding Oil
1. Remove the plug from the oil filler port.
2. Add the specified transmission oil to the oil
filler port.
3. Securely attach the plug to the oil filler port.
-60-
Advertisement
Table of Contents
Need help?
Do you have a question about the CM 230 and is the answer not in the manual?
Questions and answers