Safety Rules; Safety Declaration; Safety Operation (B71.4); Training - CanyCom CM 230 Operator's Manual

2

Safety Declaration

This machine meets the requirements of ANSI B71.4 2004, which was being valid at the time
it was manufactured. The ROPS installed in the machine meets the requirements of SAE
J2194 Standard, and the ROPS conforms to the requirements of OSHA1928.52.
* Operating this machine equipped with one or more attachments produced by
any other manufacturer will not meet the requirements of the ANSI standard.
Improper use and insufficient maintenance may cause damage to the owner
or operators of the machine. In order to avoid accidents, observe safety
operations, especially descriptions with the warning symbol "!". Not complying
with these warnings may result in serious injury or death.

Safety Operation (B71.4)

Training

1. Read and understand the manuals and other educational material. The owner of the
machine is responsible for explaining the contents of these documents to his operators
and maintenance staff who do not understand English.
2. Read and understand the safety operation and warning labels pasted on the machine.
3. All operators and maintenance persons must be trained. The owner of the machine is
responsible for training people all staff who will work with this machine.
4. Children or untrained people should never operate or maintain this machine. Local
ordinances regulating the operator's age limits should be observed.
5. The owner and operators of the machine are responsible for protecting people and
property from any accidents and injuries during operation.

Preparation

1. Check the operating area before deciding the accessories and attachments required
for safe operation. Only use accessories and attachments approved by CHIKUSUI
CANYCOM, INC. (hereafter called "Manufacturer").
2. The operators of the machine must wear proper protective clothing including safety
helmets, protective glasses, ear plugs, etc. Long hair, loose clothes, jewelry or other
accessories which could be caught in rotating parts should be removed or secured.
3. Before using the machine remove all obstacles from the operating area (stones, toys,
wires, etc.) which could be thrown by the machine or cause damage to the machine.
4. Handle gasoline or other fuels with extreme care to avoid flame and explosion risks.
a. Only use certified containers for storing and transporting fuel.
b. Never start the engine when the fuel tank cap is removed or during refueling. Do not

Safety Rules

Safety Rules
-2-