Checking Tire Pressure; Checking Rotary Height - CanyCom CM 230 Operator's Manual

Checking Tire Pressure

5317M-0502-020

Checking Rotary Height

Rotary height adjusting switch
5314M-0602-030-E
Blade height monitor
5317M-0502-040-E
Preparation
1. Check the pressures of the front and rear
wheel tires. If they do not meet the standard
value, adjust them.
In order to prevent flat tires, the boundary
zones between the tires and hubs outside
and inside the wheels are filled with a tire
protective agent (Ultraseal).
1. When adjusting cutting height by pushing the
rotary blade height adjusting switch, confirm
that the monitor is connected to indicate the
adjusted cutting height.
-23-
5