Table of Contents
Advertisement
Installing an Analog Modem
Chapter 7
If you are using a PC running Windows 95/98, you can connect an
internal analog modem to the Express 3100 and access an Internet
Service Provider or host server that does not support ISDN.
Windows NT 4.0 does not support this feature.
This chapter describes the installation procedures for internal
modems.
SETTING THE CARRIER DETECT SIGNAL
Before enabling the modem using the Express Configuration pro-
gram, set the Carrier Detect (CD) signal from the modem to Normal
(track CD signal). Use the AT command AT&C1 to do this. To enter AT
commands into the modem, open a VT-100 terminal emulation ses-
sion and enter the following (<cr> indicates you should press the En-
ter key to insert a carriage return):
61200240L2-20
Express 3100 User Manual
7-1
Advertisement
Table of Contents
