Chapter 4 Using Vt-100 Terminal Emulation - ADTRAN Express 3100 User Manual

Using VT-100 Terminal
Chapter 4
Emulation
You can configure the Express 3100 using any communications pack-
age that supports VT-100 terminal emulation. Ensure that the Express
3100 is properly connected to your PC and that it is powered on before
you try to configure your unit.
Configuring the Express 3100 Using VT-100 Terminal Emulation
Step
1 Connect to a VT-100 terminal using a communications
package such as HyperTerminal.
2 At the prompt, enter the command AT!V and press the
key. (The Configuration screen displays; see
Enter
Figure 4-1.)
The AT command is not visible as you type since echo is
off by default. To enable echo, type ATE1 .
3 Enter the following information:
• Area Code
• ISDN phone number 1
• ISDN phone number 2
4 Enter
Ctrl + X
61200240L2-20
Action
to exit the menu.
Express 3100 User Manual 4-1